Design your Light Box.
Lightbox Configurator
Anatomy of the Aluminium Box.
A cut-out Dibond panel, a diffusing PMMA sheet and an LED backplate — three layers for even lighting and maximum visibility.
01 · Cut-out Dibond box
02 · Diffusing PMMA sheet
03 · Aluminium back + LEDs
Cut-out Dibond box
Face and return folded from a single piece: aluminium composite panel with CNC-cut lettering, return folded towards the back. Stove-enamelled finish, resistant to UV and weather.
Diffusing PMMA sheet
Opal PMMA slightly smaller than the face, seated inside the box behind the cut-outs. Spreads the light evenly, with no visible hot spot.
Aluminium + LED backplate
Aluminium back panel carrying the high-intensity 12V LED modules. Light is thrown forwards through the PMMA.
Technical specifications
High-definition UV printing
Your artwork printed straight onto the PMMA face at 1440 dpi. Vivid colours, Pantone matched, UV resistance guaranteed 7 years with no noticeable fading.
160 lm/W LEDs
High-efficiency LED modules laid out in a matrix for perfectly uniform brightness.
Any RAL frame
Extruded aluminium profile powder-coated in the colour of your choice.
IP65 for outdoor use
Silicone seal all round, fully weatherproof.
Up to 4 m wide
Single-piece build up to 3 m, modular beyond that with no visible join.
Wall brackets included
Adjustable aluminium brackets, 20 to 80 mm stand-off depending on the façade.
Installation available in the Grand Est
Our certified fitters work on site throughout the Grand Est region for a turnkey installation, cherry picker included where needed.
Frequently asked questions
An out-of-the-ordinary project?
Need particular dimensions, an unusual material (brass, wood) or a complex installation? Our design office will assess the feasibility of your request within 48 hours.
Contact our teamHigh brightness • Manufactured in France